Author Topic: Picked up an anvil today  (Read 275 times)

0 Members and 1 Guest are viewing this topic.

Offline greyhound352

  • Water Stone
  • ***
  • Posts: 4427
  • Tribal Warrior of the Kracaneuners Ephesians 2.8
Picked up an anvil today
« on: October 22, 2017, 03:48:06 PM »
As we were walking through this antique store we visit every couple of months the wife goes isn't that what you have been looking for? I turned around and saw 2 anvils sitting on the back of a table, I couldn't believe I didn't see them. After checking them out and talking to the store owner about the price this little 100 pound Fisher anvil made the trip home with us. Still doing some research on this brand of anvil, what I have read is they have little ring and excellent rebound.

After getting home and getting the anvil on the back of the truck I grabbed a hammer and a 1 inch ball bearing to do some rebound tests. I'm assuming the rebound would be better on a well built anvil stand, to be built later, the hammer bounced well off of the anvil and the ball bearing dropped from 15 inches bounced all the way back to my hand.










I have been wanting to get into blacksmithing after attending the local rendezvous here in Florida with the tribe. I have purchased a pair tongs here, a hammer there, but could never find a decent anvil weight and price through our shopping adventures. Looking forward to building a stand and then pounding some metal.
"Between every two pines is a doorway to a new world." John Muir

Offline greyhound352

  • Water Stone
  • ***
  • Posts: 4427
  • Tribal Warrior of the Kracaneuners Ephesians 2.8
Re: Picked up an anvil today
« Reply #1 on: October 22, 2017, 03:54:42 PM »
I have been watching DIY videos on anvil stands and I'm thinking about the basic stacked lumber method.



I do like the idea of this stand filled with sand to help with the ring.

"Between every two pines is a doorway to a new world." John Muir

Offline wsdstan

  • Supporting Member
  • Diamond Stone
  • ****
  • Posts: 7892
Re: Picked up an anvil today
« Reply #2 on: October 22, 2017, 04:55:58 PM »
Nice one. 

I go to a few farm auctions and while there are not many anvils sold these days you do get to see some interesting stands in some of the old shops.  Lots of them are just a big section of tree trunk wide enough to stand up to the use.  A few are cut down steel barrels that probably started as 30 gallon barrels and are filled with sand or concrete.   There have been some made of wood that were built to hold the anvil without chaining it down by using blocks of wood bolted to the top that fit into the bottom outline of the anvil. 
A man who carries a cat by the tail learns  something he can learn in no other way. 
(Mark Twain)

Offline Unknown

  • Water Stone
  • ***
  • Posts: 2726
  • Alcholocost of Gibberish
Re: Picked up an anvil today
« Reply #3 on: October 22, 2017, 05:54:21 PM »
I think it would be much better stand the dimension lumber  on its end grain.

Not as convenient but it will conserve bounce

Offline greyhound352

  • Water Stone
  • ***
  • Posts: 4427
  • Tribal Warrior of the Kracaneuners Ephesians 2.8
Re: Picked up an anvil today
« Reply #4 on: October 22, 2017, 06:26:36 PM »
Nice one. 

I go to a few farm auctions and while there are not many anvils sold these days you do get to see some interesting stands in some of the old shops.  Lots of them are just a big section of tree trunk wide enough to stand up to the use.  A few are cut down steel barrels that probably started as 30 gallon barrels and are filled with sand or concrete.   There have been some made of wood that were built to hold the anvil without chaining it down by using blocks of wood bolted to the top that fit into the bottom outline of the anvil. 

Thanks Stan, not many farm auctions down here so the best options I have seen is on Craigslist. Thanks for the internet I have seen the blocks of wood that you have mentioned.
"Between every two pines is a doorway to a new world." John Muir

Offline SIXFOOTER

  • Whetstone +
  • **
  • Posts: 942
  • Wandering Smartass
Re: Picked up an anvil today
« Reply #5 on: October 22, 2017, 08:44:00 PM »
Nice score Ron. If your going to do a wood stand use the end grain set up like the first video, you want it solid with No flex and as heavy as possible, Put a layer of liquid nails or some such between the anvil and the stand, it'l kill the ring somewhat. It sounds cool in the movies but you do not want to listen to that all day. You also want a solid mount to the stand, U-Bolts, all thread and clamps..Lots of ways to do it. That one looks like its got some life left in it yet
Enjoy
Maker of all things Archaic, Hoarder of Gear and Fluent speaker of BS
Sixfooter got bit by a snake like that once, then after 4 agonizing days... The snake finally died....

Offline wolfy

  • Supporting Member
  • Belt Grinder
  • *****
  • Posts: 17598
  • "You want a toe? I can get you a toe." -Sobchak
Re: Picked up an anvil today
« Reply #6 on: October 22, 2017, 09:06:24 PM »
I never saw an anvil mounted on anything but a stump around here. :coffee:
The only chance you got at a education is listenin' to me talk!
Augustus McCrae.....Texas Ranger      Lonesome Dove, TX

Offline Dabberty

  • Whetstone +
  • **
  • Posts: 342
    • My outdoor & DIY blog
Re: Picked up an anvil today
« Reply #7 on: October 23, 2017, 12:21:30 AM »
Nice anvil you found there.
If you look for a treestump setup, have a look at mine:   http://dabberty.com/?p=1505
My outdoor & DIY blog:  www.dabberty.com

Offline wsdstan

  • Supporting Member
  • Diamond Stone
  • ****
  • Posts: 7892
Re: Picked up an anvil today
« Reply #8 on: October 23, 2017, 03:59:27 PM »
Nice anvil you found there.
If you look for a treestump setup, have a look at mine:   http://dabberty.com/?p=1505

That is similar to what a few folks around here have put together.  Metal straps work really well in this application from what I have seen and heard.  Nice job Dabberty.
A man who carries a cat by the tail learns  something he can learn in no other way. 
(Mark Twain)

Offline hayshaker

  • Whetstone +
  • **
  • Posts: 615
Re: Picked up an anvil today
« Reply #9 on: October 23, 2017, 07:51:04 PM »
sad thing with trying to find a good anvil these days is ,
cause of anvil hoarders no kidding, not too long ago
you could find anvils for a dollar a pound, nowadays
6'dollars a,lb and up. there's some guy out here'with a
machine shed full of the darn things i hear hundreds of them.
can't wait for that auction when the time comes.

Offline Dano

  • Water Stone
  • ***
  • Posts: 4972
Re: Picked up an anvil today
« Reply #10 on: October 24, 2017, 07:19:19 PM »
Wow, I'm really happy for you GH!!  It's just impossible to find anything around here except for pure junk, at enormous prices.  Looking forward to seeing what you create from your new find!!!

Offline greyhound352

  • Water Stone
  • ***
  • Posts: 4427
  • Tribal Warrior of the Kracaneuners Ephesians 2.8
Re: Picked up an anvil today
« Reply #11 on: October 24, 2017, 07:45:32 PM »
Nice score Ron. If your going to do a wood stand use the end grain set up like the first video, you want it solid with No flex and as heavy as possible, Put a layer of liquid nails or some such between the anvil and the stand, it'l kill the ring somewhat. It sounds cool in the movies but you do not want to listen to that all day. You also want a solid mount to the stand, U-Bolts, all thread and clamps..Lots of ways to do it. That one looks like its got some life left in it yet
Enjoy

Thank you Danny, I plan on doing the vertical post with the end grain up.
"Between every two pines is a doorway to a new world." John Muir

Offline OutdoorEnvy

  • Water Stone
  • ***
  • Posts: 3804
  • Outdoor Junky Approved
    • OutdoorEnvy
Re: Picked up an anvil today
« Reply #12 on: October 26, 2017, 01:07:19 PM »
That's a cool find greyhound.  That stand is a good idea too.  I wonder if you could put some stout wheels on the bottom to make it easy to move around the shop? 
Proverbs 27:17    "As iron sharpens iron, a friend sharpens a friend"
http://outdoorenvy.blogspot.com/

Offline wolfy

  • Supporting Member
  • Belt Grinder
  • *****
  • Posts: 17598
  • "You want a toe? I can get you a toe." -Sobchak
Re: Picked up an anvil today
« Reply #13 on: October 26, 2017, 06:25:26 PM »
I just gave a real nice 175# anvil away to an aspiring young knifemaker here in town.  With my shoulder surgeries and additional old-fart maladies growing worse by the year, I figured l'd rather see it stay in the area than sell it on the open market.  I gave it to him with the stipulation that he passes it on to another local young 'smith' (still unknown to us both) when he no longer has a use for it.  I also told him that I'd be watching his progress and when I thought he was up to the task and could meet my expectations, I would expect him to forge and finish a knife for me that was worthy of the coveted WOLFY APPROVED Award of Excellence! :thumbsup:
The only chance you got at a education is listenin' to me talk!
Augustus McCrae.....Texas Ranger      Lonesome Dove, TX

Offline dancan

  • Whetstone +
  • **
  • Posts: 333
Re: Picked up an anvil today
« Reply #14 on: November 04, 2017, 04:27:27 AM »
Good on you Wolfy !

Offline Spyder1958

  • Water Stone
  • ***
  • Posts: 2350
  • Kracaneuner Tribe
Re: Picked up an anvil today
« Reply #15 on: November 05, 2017, 06:02:52 AM »
Nice score Ron. Look forward to your progress.
You are free to choose but you are not free from the consequences of your choice.
Zig Ziglar