Author Topic: Axe, Saw and Hawk lust! Pictures of the hottest tools in your collection... (Read 250318 times)

easy_rider75 · « **Reply #150 on:** March 07, 2012, 06:31:51 PM »

Meant about the first pic ya posted the middle hammer type hatchet

upthecreek · « **Reply #151 on:** March 07, 2012, 06:32:28 PM »

Collins

Creek

upthecreek · « **Reply #152 on:** March 07, 2012, 06:34:49 PM »

Quote from: easy_rider75 on March 07, 2012, 06:31:51 PM

Meant about the first pic ya posted the middle hammer type hatchet

It's my user.

easy_rider75 · « **Reply #153 on:** March 07, 2012, 06:35:31 PM »

Cool setups there

upthecreek · « **Reply #154 on:** March 07, 2012, 06:51:42 PM »

Thanks easy, here is a little better pic of the whole thing. A really handy pack.

Creek

easy_rider75 · « **Reply #155 on:** March 07, 2012, 06:53:59 PM »

Nice little set up really liking those maxpedition bags the more I see them. May have to save for one this summer. How much do they hold?

upthecreek · « **Reply #156 on:** March 07, 2012, 07:03:55 PM »

I have the water bottle, small first aid kit, a psk, fire kit in the compass pouch, I carry my phone and a bandanna in the black pouch on the back, the mora, the hatchet, and a coil of cord. It weighs about 8 pounds loaded. My camera will fit in the front too.

Half Axe · « **Reply #157 on:** March 07, 2012, 09:28:26 PM »

I like that Collins in the hudson bay pattern, UTC. Wicked Cool!

upthecreek · « **Reply #158 on:** March 09, 2012, 08:52:31 PM »

Creek

Kep · « **Reply #159 on:** March 11, 2012, 12:13:47 PM »

ive had a couple of people ask to see my felling axe in the past, so i thought id add it to this thread, made by Elwell with 4.5Lb head, i have no idea how old this is, but is aint a young un for sure, ive not used this for a little while (chainsaws are so much less effort) now and the edge could really do with a damned good sharpen looking at it, might do that tomorrow

Mora for scale

Kep · « **Reply #160 on:** March 12, 2012, 01:32:42 PM »

a few of my buck & bow saws, i have a load more in the work shop up the lakes

upthecreek · « **Reply #161 on:** March 12, 2012, 07:43:24 PM »

Thanks Kep. Send that ole faller to me if you get tired of it

Kep · « **Reply #162 on:** March 13, 2012, 03:05:35 AM »

Quote from: upthecreek on March 12, 2012, 07:43:24 PM

Thanks Kep. Send that ole faller to me if you get tired of it

i thought about your request - err - No

upthecreek · « **Reply #163 on:** March 13, 2012, 07:43:31 PM »

Creek

GrowlingBear · « **Reply #164 on:** March 13, 2012, 10:37:12 PM »

I love that double bit, Creek. What is that giant slab of wood it's stuck in?

upthecreek · « **Reply #165 on:** March 14, 2012, 06:19:59 AM »

Quote from: GrowlingBear on March 13, 2012, 10:37:12 PM

I love that double bit, Creek. What is that giant slab of wood it's stuck in?

That's the near bottom slice of a big ole oak that fell last fall and took the power out for about 3 days. It's about 5 feet in diameter and we figure it weighs 3 hundred pounds. Great for tossing axes at!

OutdoorEnvy · « **Reply #166 on:** March 14, 2012, 10:21:58 AM »

Very nice axes everyone, especially UTC And Trekker,

Here's a couple of mine, Plumb Double and Wetterlings LHA

upthecreek · « **Reply #167 on:** March 14, 2012, 07:43:08 PM »

I declare these as my 2 new favorites! Gonna have leather fixed for them. The GB is 3 1/2 lbs on 30 inches and the Mann is 2 3/4 lbs on a 28 in.

Creek

upthecreek · « **Reply #168 on:** March 14, 2012, 07:44:19 PM »

I need an American flag emoticon!!

OutdoorEnvy · « **Reply #169 on:** March 15, 2012, 06:58:58 AM »

You're one lucky SOB to have those creek

I'm very jealous if you can't tell. Thanks for rubbing it in

upthecreek · « **Reply #170 on:** March 15, 2012, 07:11:04 AM »

Ahhh..they'll come around to ya. the sun don't shine on the same dogs ass everyday. That's what my dad used to always say!

easy_rider75 · « **Reply #171 on:** March 15, 2012, 10:58:42 AM »

Quote from: OutdoorEnvy on March 14, 2012, 10:21:58 AM

Very nice axes everyone, especially UTC And Trekker,

Here's a couple of mine, Plumb Double and Wetterlings LHA

Damn nice stuff bud really dig that pack what's the make on it?

OutdoorEnvy · « **Reply #172 on:** March 15, 2012, 01:11:40 PM »

Quote from: easy_rider75 on March 15, 2012, 10:58:42 AM

Damn nice stuff bud really dig that pack what's the make on it?

Thanks, it's just an old swedish rucksack.

H_Talon · « **Reply #173 on:** March 15, 2012, 02:56:46 PM »

wish you guys would stop putting up pictures of those
double bit cruisers ... I really need to find a lite weigh
double bit ...

Talon

upthecreek · « **Reply #174 on:** March 15, 2012, 06:55:16 PM »

Creek

OutdoorEnvy · « **Reply #175 on:** March 16, 2012, 07:20:20 AM »

Creek are these going to get the "Creek" mod? They look like they're begging for it

upthecreek · « **Reply #176 on:** March 16, 2012, 10:45:03 AM »

these are finished as is.

upthecreek · « **Reply #177 on:** March 18, 2012, 06:16:27 PM »

Pretty cool one!

Creek

PetrifiedWood · « **Reply #178 on:** March 18, 2012, 07:52:37 PM »

That is neat, Creek!

I've never seen even a picture of an axe like that. Tell us more about it!

upthecreek · « **Reply #179 on:** March 18, 2012, 08:01:28 PM »

well..it's a true temper black raven and as collectable as it gets. Funny...I was just wondering if you want to edge it. I just want it super cleaned. Not ground..if that makes sense. The edges, rough wacker vs chopper, are quite plain. I really don't want much metal removed, but I know you could shine it right up!

Half Axe · « **Reply #180 on:** March 18, 2012, 08:21:39 PM »

A Black Raven! I am green with envy. Good on ya, UTC, and thanks for sharing - haven't seen one of those in a long time.

PetrifiedWood · « **Reply #181 on:** March 18, 2012, 09:59:31 PM »

Quote from: upthecreek on March 18, 2012, 08:01:28 PM

well..it's a true temper black raven and as collectable as it gets. Funny...I was just wondering if you want to edge it. I just want it super cleaned. Not ground..if that makes sense. The edges, rough wacker vs chopper, are quite plain. I really don't want much metal removed, but I know you could shine it right up!

I have a really fine grit belt that would really just polish it more than anything else. We can talk about it on the phone sometime.

JTD · « **Reply #182 on:** March 18, 2012, 10:04:11 PM »

Here's a new to me Kelly I got in a swap. Thanks UTC for the handle!

upthecreek · « **Reply #183 on:** March 19, 2012, 10:56:33 AM »

Looks Great JD!

upthecreek · « **Reply #184 on:** March 19, 2012, 06:28:40 PM »

Creek

Wilderbeast · « **Reply #185 on:** March 19, 2012, 07:46:04 PM »

I know its axe saw and hawk porn, but I really like that pot rack.

JTD · « **Reply #186 on:** March 19, 2012, 08:03:19 PM »

Quote from: upthecreek on March 19, 2012, 06:28:40 PM

Creek

Nice!

upthecreek · « **Reply #187 on:** March 19, 2012, 08:04:16 PM »

I'll be bringing the cookset out.

GrowlingBear · « **Reply #188 on:** March 23, 2012, 09:54:47 PM »

These are a couple of axes I made. Of course, they're a bit smaller than your normal axes. I made them in a jewelry class I took a few years back. Both are sterling silver. The one on the left was made with a piece of square wire that was twisted for a handle area. The bit and spike were cut out of sheet with a jeweler's saw and then soldered on to the wire. All shaping was done with jeweler's files and sandpaper. The axe on the right started as wax, then cast in silver.

cattledog · « **Reply #189 on:** March 24, 2012, 07:33:26 AM »

Quote from: GrowlingBear on March 23, 2012, 09:54:47 PM

These are a couple of axes I made. Of course, they're a bit smaller than your normal axes. I made them in a jewelry class I took a few years back. Both are sterling silver. The one on the left was made with a piece of square wire that was twisted for a handle area. The bit and spike were cut out of sheet with a jeweler's saw and then soldered on to the wire. All shaping was done with jeweler's files and sandpaper. The axe on the right started as wax, then cast in silver.

That is some outstanding work. Bet they are expensive now.

cattledog · « **Reply #190 on:** March 24, 2012, 08:13:45 AM »

Quote from: redman8066 on February 09, 2012, 03:16:18 PM

my trail hawk

[

I like this shot and your hawk.

cattledog · « **Reply #191 on:** March 24, 2012, 08:20:32 AM »

Couple of mine.

Council and Craftsman

Unmarked Double

easy_rider75 · « **Reply #192 on:** March 24, 2012, 03:00:41 PM »

Quote from: GrowlingBear on March 23, 2012, 09:54:47 PM

These are a couple of axes I made. Of course, they're a bit smaller than your normal axes. I made them in a jewelry class I took a few years back. Both are sterling silver. The one on the left was made with a piece of square wire that was twisted for a handle area. The bit and spike were cut out of sheet with a jeweler's saw and then soldered on to the wire. All shaping was done with jeweler's files and sandpaper. The axe on the right started as wax, then cast in silver.

GB you have some serious skills Bud those are outstanding

OutdoorEnvy · « **Reply #193 on:** March 26, 2012, 08:16:50 AM »

Here's a few pics of my Wetterlings in it's natural environment with a couple friends from a recent trip

upthecreek · « **Reply #194 on:** March 26, 2012, 07:38:18 PM »

2 cool old Gransfors

Creek

OutdoorEnvy · « **Reply #195 on:** March 27, 2012, 06:56:36 AM »

Nice Creek!

What's the weight on that single bit?

upthecreek · « **Reply #196 on:** March 27, 2012, 10:32:25 AM »

the single is 4 3/4 lbs total, haft is 35 inches. The DB is 5 1/4 on a 30 inches.

PetrifiedWood · « **Reply #197 on:** March 27, 2012, 02:43:01 PM »

I need to look in here more often! GB, those silver axes are really beautiful. You've got a lot of talent man!

easy_rider75 · « **Reply #198 on:** March 30, 2012, 08:12:20 PM »

Damn Creek those GBs are nice but man really dig that Black Raven kinda jealous here that thing is wall art

upthecreek · « **Reply #199 on:** April 01, 2012, 11:08:55 AM »

A little axe porn with a knife thrown in

Creek

News:

Author Topic: Axe, Saw and Hawk lust! Pictures of the hottest tools in your collection... (Read 250318 times)

Half Axe

Half Axe